Upgraded Insulation Surface Mounting

Constantly increasing façade insulation thickness requires new mounting solutions in the assembly of components in the full thermal protection system. The new innovative mounting block is manufactured by COMPACFOAM.



The installation components are adapted to the required geometry of the part and delivered in a tube. The elements can be cut to length or simply cut as required insulation thickness at the construction site.



 

The tensile forces are led by well-known steel anchors into the wall. The mounting can be performed using standard screws without pre-drilling directly into COMPACFOAM at medium loads.


INFORMATIONSPLICHT LT. ECG
UND MEDIENGESETZ
COMPACFOAM GMBH, Resselstrasse 7-11, A -2120 Wolkersdorf im Weinviertel, TEL. +43 (0)2245 / 20 8 02, FAX DW 329
GESCHÄFTZWEIG: PRODUKTION UND VERTRIEB VON TECHNISCHEN KUNSTSTOFFEN / FIRMENBUCH-GERICHT: HANDELSGERICHT KORNEUBURG FN293805t / UID-NR. ATU63550614

EDITED BY N.E.S.P.I. | DESIGNED BY GOLIVER.INFO
EXIT
<<-
->>